.When driving, the height of the bottom of the fork from the ground should be maintained and the mast must be tilted backward. Do not raise the fork too high while driving. When entering or leaving the work site or while driving, pay attention to whether there are any obstacles in the sky. If the fork is raised too high when driving with goods, it will increase the height of the forklift's overall center of gravity and affect the stability of the forklift.
After unloading, lower the fork to the normal driving position before driving.
When turning, if there are pedestrians or vehicles nearby, the signal should be given first and high-speed sharp turns are prohibited. Sharp turns at high speed can cause the vehicle to lose lateral stability and tip over.
It is strictly forbidden to turn off the engine and coast when the internal combustion forklift is going downhill.
Sudden braking while driving with cargo is prohibited except under special circumstances.
Do not use the brakes except under special circumstances when driving with a load exceeding 100° and going up or downhill at a speed higher than first gear.
When the forklift is operating, it must abide by the traffic rules in the factory and must maintain a certain safe distance from the vehicle in front.
When the forklift is running, the load must be at the lowest position that does not hinder the movement, and the mast must be tilted backward appropriately. The load shall not be raised except when stacking or loading. When transporting large objects, the forklift should be reversed when the object blocks the driver's view.
The rear wheels of the forklift control the steering, so you must always pay attention to the swing of the rear of the vehicle to avoid excessive turns that often occur when beginners drive.
Turning on ramps is prohibited and driving across ramps is prohibited.
Shijiazhuang Jinmao Storage Machinery Co., Ltd. is a modern storage equipment enterprise integrating professional research and development, production, sales and installation. The company adheres to the business philosophy of "customer first and enterprising". After years of development, it has strong technical and product development capabilities, advanced production equipment, mature production technology and a complete quality assurance system, as well as professional on-site construction and graded after-sales service. system.
The products have been successfully used in supermarkets, food, pharmaceuticals, chemicals, electronics, machinery, automobiles, military warehouses and many other fields and have been well received.
Shijiazhuang Electric Forklift
Address: No. Huanghe Avenue, East Development Zone, Shijiazhuang City (opposite the west gate of Baoshi Group)
Telephone: -
Shijiazhuang Electric Forklift Jinmao Storage Forklift Driving Operation Safety Regulations